To setup a Smart Finder (6ATAG3), follow the following steps:
- Remove the Smart Finder’s battery film by pulling it out to connect the battery. You will hear a chime to indicate the Smart Finder is powered on. If you do not hear the chime, press the function button once to power on your Smart Finder.
- Open the Apple Find My app on your supported iPhone or iPad.
- Tap +, then “Add Other ltem”. Please make sure not to use “Add AirTag”, as this is reserved for Apple AirTag. You can only use the option “Add Other Item”.
- Once your 6ATAG3 is located, tap “Connect”.
- Enter a name, select an emoji for your Smart Finder, and tap “Continue’’.
- Tap “Agree” to add the Smart Finder to your Apple ID.
- Tap “Finish” and your Smart Finder will be set up and ready to be used.
If the Smart Finder is not added to an Apple ID within 10 minutes after powering it on, it will automatically power off again. Press the function button once to power it on and repeat steps 2 to 7 if that happens.
Translation generated by AI.